Are You looking for the [2024] latest GE universal remote codes for LG DVD players? Then you are in the right place.
In this article, I have shared the 100% working and best GE universal remote codes for LG DVD player and LG Blu-Ray player along with the programming instructions. So you can effortlessly program your GE universal remote to an LG DVD player and Blu-Ray player.
Let’s get started.
Contents
GE Universal Remote Codes For LG DVD Player
To Find the remote CL version open the remote battery compartment remove the batteries and see the label attached there.
GE Universal remote CL Version | Codes for LG DVD player |
Codes for GE CL6 Remote | 4285, 2635, 3915, 2335, 2555, 2565, 0205, 0635,1565, 2925, 3785, 3885, 0562 |
Codes for GE CL5 Remote | 4285, 2635, 3915, 2335,2555, 2565, 0205, 0635,1565, 2925, 3785, 3885, 0562 |
Codes for GE CL4 Remote | 0205, 0635, 1565, 2335,2555, 2565, 2635, 2925,3785, 3885, 3915, 4285, 0562 |
Codes for GE CL3 Remote | 2635, 4285, 3915, 2335,2555, 2565, 0205, 0635,1565, 2925, 3785, 3885 |
GE Universal Remote Codes for LG Blu-Ray Player
GE Universal remote CL Version | Codes for LG Blu-Ray player |
Codes for GE (CL6, CL5, CL4, CL3) Remote | 4285, 2635, 2335 |
How to program GE Universal Remote with LG DVD Player
Once you have the right codes the next step is to program the GE universal remote.
To program your GE universal remote Follow the steps mentioned below.
- Turn on your LG DVD player.
- Take your GE universal remote and press and hold the Setup button.
- Hold it until the red light turns on.
- Now locate the DVD button on the remote and press it. (For Blu-Ray press the B-RAY button)
- After pressing the DVD button enter the 4-digit code from the above table.
- If your entered code is correct the red light should turn off.
- If it doesn’t turn off then try the next code until the red light turns off.
- Once the Red light of the remote turns off.
Cheers, your GE universal remote is paired with the LG DVD player. Now you can use your GE universal remote to control your LG DVD player and Blu-Ray player.
You can also program the GE remote with an LG TV.
GE Universal Remote not working with LG DVD Player
If your GE universal remote is not working with your LG DVD player then follow the steps mentioned below to fix your remote.
- Ensure that the batteries in your remote are placed properly according to their terminal (Positive, Negative).
- If the batteries of your remote are too old consider replacing them with a new pair.
- Make sure that there is no obstruction between the remote and the device.
- Try to turn on and off the device.
- If one code doesn’t work with your device use the next code mentioned in the list.
Reset GE Universal Remote
If your GE universal remote is still not working then you can reset the GE universal remote to solve this not working issue.
- Take your remote and Press and hold the setup button until the red light stays on, then release it.
- The red light will remain on.
- Then Press and release the OK button of the remote.
- After that Press and release the 0 (zero) key of the remote.
- Your remote is reset now.
What to do if the Codes are not Working
If the GE universal remote codes are not working then you can use the Auto program method to program your remote. In this method, your remote will automatically find the right code for your device.
- Turn on your device and point the remote toward the device.
- Press and hold the Setup button of the remote until the red light turns on.
- Now press the DVD button or B-Ray button according to your device.
- After this press and release the Power button every 3 seconds until your device turns off.
- Now turn the device on again.
- Point your remote toward the device and press and release the Volume Up (+) button every 3 seconds
- Do it until your device turns off.
- Once your device turns off press the DVD or B-RAY button according to your device.
That’s it your GE universal remote is programmed with your device without using the codes.
FAQ
Can I use a GE universal remote with an LG DVD player?
Yes, you can use a GE universal remote with an LG DVD player.
Conclusion
That’s it for this article.
I hope you find this article helpful and informative.
To program your GE universal remote with the LG DVD player and LG Blu-Ray player all you need is just a pair of right codes. If you have any suggestions or doubts related to this article please let me know in the comments.
Thank You
“Hi, I’m Harsh, the driving force behind universalremoteexpert.com. I dive deep into tech, sharing hands-on insights through quick articles. Explore the latest trends and innovations with me as your guide in the world of universal remotes!”