Are you looking for the latest GE universal remote codes for Emerson TV? Fear not let me help you with this.
In this article, I have shared the best GE universal remote pairing codes for Emerson TV along with the programming guide.
With the help of these codes and programming steps, you can effortlessly program your GE universal remote to Emerson TV.
Let’s get started.
Contents
List of GE Universal Remote Codes for Emerson TV
To find your GE remote CL version open the battery compartment and see the label attached to the battery compartment of the remote.
GE remote CL version | List of GE universal remote codes |
GE CL6 remote | 2761, 5761, 5231, 5221, 5831, 5561, 5421, 0141, 0201, 2891, 4731, 1651 |
GE CL5 remote | 5761, 2761, 5231, 5221, 5561, 5831, 4731, 5421, 5741, 0001, 0141, 1651, 0201, 0231, 0951, 1551, 5551, 2891 |
GE CL4 remote | 2761, 5761, 5221, 5231, 5561, 5831, 4731, 5421, 5741, 0001, 0141, 1651, 0201, 0231, 0951, 1551, 5551 |
GE CL3 remote | 2761, 5221, 5231, 4731, 5341, 0001, 0021, 0031, 0041, 0271, 0281, 0291, 0371, 0441, 0451, 0691, 0701, 0731, 0741, 0851, 0931, 1221, 1251, 1261, 1371, 1381, 1451, 1461, 1551, 1611, 1631, 1681, 1701, 1711, 1931, 1941, 2171, 2191, 2361, 3451, 4701, 4751, 4761, 4831, 4911 |
This is the complete list of 4-digit GE universal remote codes for Emerson TV and you can use these codes to program any Emerson TV including Emerson flat screen TV etc.
How to program GE Universal Remote to Emerson TV
- Turn ON your Emerson TV.
- Press and hold the Setup button on the remote.
- Hold the button until the red light on the remote turns ON.
- Now press the TV button on the remote.
- After that enter the first 4-digit code mentioned in the table.
- If the code is right the red light should turn OFF.
- If it doesn’t keep entering the next code one by one from the table.
- Once the red light of the remote turns OFF press the power button of the remote.
Your GE universal remote is programmed with your Emerson TV. Use the remote’s power button to turn on the TV and enjoy.
If some buttons of your remote are not working properly then follow the programming process again with the next code from where you left.
Program GE Universal Remote to Emerson TV without codes
To setup your GE universal remote to Emerson TV without using the codes follow the steps mentioned below.
- Turn On your Emerson TV.
- Hit and hold the Setup button of the remote.
- Hold the button until the red light on the remote turns ON.
- Press and release the TV button on the remote.
- Now keep pressing the power button of the remote every 4 seconds until the TV turns OFF.
- Once the TV turns OFF turn it ON by pressing the power button of the TV.
- Now keep pressing the Volume UP(+) button every 4 seconds until the TV turns OFF.
- After the TV turns OFF press the TV button on the remote.
- Press the power button of the remote to turn ON your TV.
Boom! Your GE universal remote is synced with your Emerson TV without using the codes.
While using this method to program the remote keep patience because your remote can take some time to find the right codes for your device.
So wait for your device to respond to the remote and follow all the instructions carefully.
GE Universal Remote is not working with Emerson TV
If the GE universal remote is not working with your Emerson TV you can follow some fixing steps mentioned below.
- Make sure that your remote batteries have enough charge in them.
- If you have been using the batteries for a long time consider replacing them with a new pair.
- Try to keep the distance minimum between the TV and the remote while programming the remote.
- Before selecting the codes always check your remote CL version and select the right codes according to your remote version.
- Ensure that the programming device limit of your GE universal remote is not over.
- Reste and re-program the GE universal remote.
Reset the GE Universal Remote
Here are the simple steps to reset your GE universal remote.
- Hold the Setup button of the remote until the red light turns ON.
- Press the OK button on the remote
- Now press the 0(Zero) button on the remote.
- The red light will blink twice.
Your GE universal remote is now reset to its factory setting and all the stored data is erased. Now you can use the right codes to program the GE universal remote with your Emerson TV.
FAQ
Can I use the GE Universal Remote for Emerson TV?
Yes, the GE universal remote works well with Emerson TV.
Is there a universal remote app for Emerson TV?
You can use any good universal remote app to control your Emerson TV.
What are GE Universal Remote CL4 codes for Emerson TV?
Here is the list of GE universal remote CL4 codes for Emerson TV
- 2761,5761,5221,5231,5561,5831,4731,5421,5741,0001,0141,1651,0201,0231,0951,1551,5551
What are the GE Universal Remote CL5 Codes for Emerson TV?
Here is the list of GE universal remote CL5 codes for Emerson TV.
- 5761,2761,5231,5221,5561,5831,4731,5421,5741,0001,0141,1651,0201,0231,0951,1551,5551,2891
Wrap up
That’s the end of this article.
In conclusion, Programming the GE universal remote with the Emerson TV is a very easy thing all you just need is a bunch of right codes and the programming steps.
I hope this article helped you in the programming process of your GE universal remote. If you are still struggling to program your GE universal remote please let me know in the comments.
other than Emerson TV the GE universal remote is also used to control different TVs like Philips TV, etc.
Thank You
NOTE– After finding the right codes I suggest you note down the codes or bookmark this page so you never forget your GE remote codes.
“Hi, I’m Harsh, the driving force behind universalremoteexpert.com. I dive deep into tech, sharing hands-on insights through quick articles. Explore the latest trends and innovations with me as your guide in the world of universal remotes!”