Are you looking for the latest 2024 GE universal remote codes for Hitachi TV? Then you are in the right place.
In this article, I have shared the latest and best GE universal remote codes for Hitachi TV and Hitachi Roku TV along with the programming instructions.
All these codes and steps shared in this article are the latest and most up-to-date.
Let’s get started.
Contents
List of GE Universal Remote codes for Hitachi TV
Your remote CL version was mentioned in the battery compartment of the remote either on the label attached there or engraved in the lid of the battery compartment.
| GE universal remote version | Hitachi TV codes |
| GE CL6 remote | 6301, 4331, 6171, 1041, 0925 |
| GE CL5 remote | 6301, 1041, 6171, 4331, 0925 |
| GE CL4 remote | 1041, 4331, 0925 |
| GE CL3 remote | 4331, 3341, 0001, 0841, 0931, 1041, 1221, 1271, 1341, 1371, 1481, 1661, 1721, 1751, 1801, 1911, 1981, 2051, 3621, 4121, 4731 |
This is the complete list of 4-digit GE universal remote codes for Hitachi TV. You can use these codes to program almost all the models of Hitachi TV.
GE Universal Remote codes for Hitachi Roku TV
To program the GE universal remote with Hitachi Roku TV you can use the code 6171.
| GE CL4/ CL5/ CL6 remote | 6171 |
The GE CL3 version remote is not compatible with Hitachi Roku TV.
How to program GE Universal Remote to Hitachi TV
- Turn ON your Hitachi TV / Hitachi Roku TV.
- Hold the Setup button of the remote until the red light on the remote turns ON.
- Now press the TV button on the remote.
- Enter the first 4-digit code mentioned in the table.
- After entering the code the red light should turn OFF.
- If it doesn’t keep entering the next codes one-by-one until the light turns OFF.
- After the light turns OFF point your remote toward the TV and test all the buttons.
Your GE universal remote is programmed with your Hitachi TV.
If your remote is not functioning properly then follow the programming process again with the next code mentioned in the table.
Program GE Universal Remote to Hitachi TV without codes
If the codes are not working for your device you can use the no-code method to setup the GE universal remote with Hitachi TV.
- To setup the remote turn ON your Hitachi TV.
- Hold the Setup button of the remote until the Red light turns ON.
- Press and release the TV button on the remote.
- Now keep pressing the Power button of the remote every 4 seconds until the TV turns OFF.
- Once the TV turns off turn it ON again by the power button of the TV.
- Now keep pressing the Volume UP(+) button every 3 seconds until the device turns OFF.
- After the TV turns OFF press the TV button on the remote.
Your GE universal remote is now paired with your Hitachi TV. Press the remote’s power button to turn on your TV and enjoy your favorite shows.
In this method, your remote can take some time to find the right codes for your device. So while programming wait for your remote to respond to the TV.
Does GE Universal Remote work with Hitachi Roku TV?
Yes, the GE universal remote works well with Hitachi Roku TV but only the CL4, CL5, and CL6 versions are compatible.
So if you have a CL3 version or older version of the GE universal remote consider upgrading it to the latest version (CL6) of the GE universal remote to use it with the Hitachi Roku TV.
FAQ
Can I turn my Hitachi TV on without a remote?
Yes, you can use the TV power button to turn ON the Hitachi TV without a remote.
Where is the power button on Hitachi TV?
The power button of the Hitachi TV is located either on the side(left/right) panels of the TV or on the bottom front panel of the TV. You need to look carefully at all the sides of the TV including behind the TV to find the Power button.
Can we use GE Universal Remote for Magnavox TV?
Yes, the GE universal remote works well with the Magnavox TV. You can easily pair the GE universal remote to the Magnavox TV.
Can you use a universal remote on Hitachi TV?
Yes, you can use a universal remote to control the Hitachi TV.
Conclusion
In conclusion, Programming the GE universal remote with the Hitachi TV is not a rigorous task all you need is the correct codes and programming steps.
If you are still unable to program your GE universal remote please let me know in the comments.
Thank You
“Hi, I’m Harsh, the driving force behind universalremoteexpert.com. I dive deep into tech, sharing hands-on insights through quick articles. Explore the latest trends and innovations with me as your guide in the world of universal remotes!”