GE Universal Remote Codes for Sanyo TV & Programming Guide

Are you looking for the latest GE universal remote codes for Sanyo TV?

Your search journey ends here.

In this article, I have shared the complete list of 2024 latest GE universal remote codes for Sanyo TV and Sanyo Roku TV along with the programming instructions.

Without any delay let’s get started.

List of GE Universal Remote Codes for Sanyo TV

Your GE remote CL version was mentioned in the battery compartment of the remote see the label attached inside the battery compartment.

GE Universal Remote Models (CL version)	Sanyo TV Codes
GE CL6 remote	1161, 5261, 6171, 2891, 5251
GE CL5 remote	1161, 5261, 2891, 5251
GE CL4 remote	1161, 5261, 2891, 5251
GE CL3 remote	5261, 5251, 2981, 2991, 3051, 0001, 0801, 1051, 1161, 1261, 1531, 1581, 1911, 2871, 2881, 3481, 5001, 5241

This is the complete list of 4-digit GE universal remote codes for Sanyo TV.

List of GE universal remote codes for Sanyo Roku TV

Cl4 / CL5 / CL6 remote

6171

Only the GE CL4, CL5, and CL6 versions of the remote are compatible with Sanyo Roku TV.

How to program GE Universal Remote to a Sanyo TV

1. Switch on the Sanyo TV.
2. Take your GE universal remote and press and hold the Setup button until the red LED turns on.
3. Now Press the TV button on your remote control.
4. Enter the 4-digit code from the table by using the number keys.
5. After entering the code the red LED should turn off. if it doesn’t turn off then try the next code mentioned in the table.
6. Repeat this step until the RED LED light turns off
7. After the LED light turns off.

Congratulations your GE universal remote is now programmed with the Sanyo TV. You can use the GE remote to control your Sanyo TV.

If you find out that some remote buttons are not working simply repeat the programming process with the next code mentioned in the table.

Program GE Universal Remote to Sanyo TV without codes

To Program your GE universal remote to Sanyo TV without using the codes follow the steps mentioned below-

1. First turn on the Sanyo TV which needs to be programmed.
2. Take your remote and press the Setup/Search button until the red light turns on.
3. Now press the TV button on your remote.
4. Wait for the red light to FLASH once.
5. Now point your remote toward the TV and press the Power button.
6. Keep pressing the power button every 5 seconds until your Sanyo TV turns off.
7. After the Sanyo TV is turned off now turn it on by using the power button of the TV.
8. Then point your remote toward the TV and press and hold the Volume Up(+) button.
9. Keep pressing it until the device is turned off.
10. After it turns off press the TV button on the remote to confirm the code.

Bingo your GE universal remote is programmed with your Sanyo TV. Now you can use the Power button to turn On and control your TV.

Keep in mind that while using this method your remote can take some time to find the right codes for your device.

GE Universal Remote Troubleshooting Guide

You can follow this troubleshooting guide Your GE universal remote is not working with Sanyo TV.

1. Try to setup the GE remote with different codes available in the table GE universal remote code list for Sanyo TV.
2. Check whether the remote batteries are properly placed or not.
3. Check whether the remote batteries have enough charge or not if the batteries are discharged replace them with a new set of batteries.
4. Reset the GE universal remote and try to program it again for Sanyo TV.
5. Turn on and off the Sanyo TV and try to re-program the remote.

Does the GE Universal Remote work with Sanyo Roku TV?

Yes, you can use the GE universal remote to control the Sanyo TV but only the CL4, CL5, and CL6 versions of the GE universal remote are compatible with the Sanyo Roku TV.

FAQ

Can you use a Universal Remote for a Sanyo TV?

Yes, you can use a universal remote for a Sanyo TV.

Can I control my Sanyo TV with my Phone?

Yes, if your phone supports that feature you can use your smartphone to control the Sanyo TV.

Does Sanyo have a Remote App?

I don’t think so but there are many universal remote applications you can use to control your Sanyo TV with your phone.

Conclusion

That’s the end of this article.

I hope with the help of these codes you can easily program your GE remote with Sanyo TV and Sanyo Roku TV. Along with Sanyo TV, you can also program the GE universal remote with Dynex TV.

If you have any queries or suggestions related to this article you can comment below.

Thank you