Looking for the latest GE universal remote codes for TCL TV? Fear not let me help you.
In this article, I have shared the [2024]latest GE remote codes for TCL TV and TCL Roku TV along with the programming instructions. Make sure to carefully follow all the instructions provided in this article to successfully set up your remote.
Let’s get started
Contents
List of GE universal remote codes for TCL TV
To know your remote CL version open the remote battery compartment remove the batteries and see the label attached there.
| GE Remote Model | Codes for TCL TVs |
|---|---|
| Code List 6 (CL6) | 6171, 5961, 6031, 6651, 6201, 5771 |
| Code List 5 (CL5) | 6171, 5961, 6031, 5771, 6201 |
| Code List 4 (CL4) | 6171, 5961, 6031, 5771, 6201 |
| Code List 3 (CL3) | 2851, 0091, 1421, 1691, 1851, 2011, 2061, 2111, 2301, 3421, 3431, 3571, 4921, 6171 |
List of GE universal remote codes for TCL Roku TV
Here is the list of codes for TCL Roku TV
| GE Remote | Codes for TCL Roku TV |
| GE (CL4, CL5, CL6) Remote | 6171 , 2891 |
How to program GE universal remote with TCL TV
To pair your GE universal remote with TCL TV and TCL Roku TV follow the steps mentioned below.
- Turn on your TCL TV.
- Press and hold the Setup button of the remote.
- Hold the setup button until the red light on the remote turns on.
- Now press and release the TV button on the remote.
- Now enter the 4-digit code by using the remote number keys.
- The red light should turn off.
- If the red light doesn’t turn off then enter the next code mentioned in the table.
- Keep entering the next codes until the red light turns off.
- Once the remote red light turns off.
That’s it your GE universal remote is programmed with your TCL TV. Use the same method to program the GE universal remote with TCL Roku TV.
How to program GE universal remote with TCL TV without Codes
You can easily program your GE universal remote to TCL TV without using the codes. To do so follow the steps mentioned below.
- Turn on your TCL TV.
- Press and Hold the Setup button of the remote.
- Hold the button until the RED light of the remote turns on.
- Press and release the TV button on the remote.
- Now press the Power button of the remote every 4 seconds until the TV turns off.
- Once the TV turns off turn it on by using the TV power button.
- Now press the Volume Up(+) button every 3 seconds until the TV turns off.
- After the TV turns off press the TV button on the remote to save the code.
That’s it your remote is now paired with your TV. Now you can use your remote to control the TV.
However, the time required to find the right codes can vary from device to device. So while using this auto code method be patient and wait for your TV to respond to the remote.
Tips for Optimal Performance
Here are some tips for the optimal performance of the remote.
- Ensure that the distance between the remote and the TV should not exceed 6 meters.
- Always use a fresh pair of batteries before programming the remote with the device.
- Remove any obstruction (furniture, decorative items, etc) between the remote and the TV.
- Don’t use thick remote covers as it might affect the range of the remote.
- Read the instructions carefully and always be patient while programming the GE remote.
FAQ
Can you program a universal remote to a TCL TV?
Yes, you can use a Universal remote with TCL TV.
Why the Codes for TCL TV are not working?
Don’t panic, try out the different codes mentioned in the table. If all the mentioned codes in the table don’t work for you then you can use the Auto code finding method to program your remote without codes.
If the problem persists please let me know in the comments section.
What are the CL3 remote codes for TCL Roku TV?
There are no CL3 codes available for TCL Roku TV because according to the GE official website the GE CL3 remote doesn’t support the TCL Roku TV.
Conclusion
That’s it for this article.
I hope you find this article informative and helpful.
If you face any trouble while programming your GE universal remote with TCL TV or have any suggestions please let me know in the comments.
See you again with the solution of another problem.
Thank You.
“Hi, I’m Harsh, the driving force behind universalremoteexpert.com. I dive deep into tech, sharing hands-on insights through quick articles. Explore the latest trends and innovations with me as your guide in the world of universal remotes!”