How To Program RCA Universal Remote

To use the RCA universal remote with any device like TV, DVDs, etc first you need to program RCA universal remote with that device.

If you don’t know how to program RCA universal remote fear not let me assist you.

In this article, you will learn how to setup the RCA universal remote with your device with and without using the codes.

Without wasting time let’s get started.

How to program RCA Universal remote with Codes

• Turn on the device that you want to program.
• Now press and hold the device button according to your device if you are programming the remote with a TV select the TV button, for DVD select the DVD button.
• While holding the device button enter the code for your device.
• If the entered code is correct the power button should light up.
• If the power button blinks four times then the entered code is incorrect.
• In this case, enter the next code available.
• Once the right code is found release the device button(TV, DVD, VCR, etc.).

Once the power button lights up release the device type button and that’s it your RCA universal remote is programmed with your device. Now you can use the remote to control your device.

How to program RCA Universal Remote without codes

To setup RCA universal remote without codes with your device you can follow this RCA universal remote code search method.

• Turn on the device that you wish to program.
• Press and release the device button(TV, DVD, etc.) on the remote according to your device.
• The red light on the remote will begin to flash.
• Hold the power button and the device button together.
• The power button will blink and remain lit.
• After that release the Power button and Device button(TV, DVD, etc.).
• Press and release the Play button of the remote every 5 seconds.
• Do it until your device turns off.
• After the device turns off press and release the Reverse button of the remote.
• Press it every 5 seconds until the device turns on.
• Once the device turns on press the stop button on the remote.

That’s it you have successfully done the RCA universal remote programming with your device without using the codes. You can use this method to setup an RCA universal remote with any device like TV, DVD, etc without using the codes.

If your RCA remote has a Code Search Button

Some RCA universal remote has a dedicated code search button present on the top right corner of the remote. This code search button is used while programming the remote with the device.

So if your remote has a dedicated code search button then the above-listed method wouldn’t work with your remote.

In this case, you can refer to this guide to program RCA universal remote with a code search button.

How to program the RCA universal remote without a code search button

If your RCA universal remote doesn’t have a code search button then you can follow the methods mentioned in this article. These methods are meant to program the RCA universal remote without a code search button.

How to find the RCA universal remote codes for your device.

To find the right RCA universal remote for your device you can look up the instruction manual that comes with the remote or you can check out the complete list of RCA universal remote codes that I have shared.

If you don’t want to waste your time in finding and testing the codes you can simply setup your RCA universal remote without codes.

How do I reset an RCA Universal Remote?

To reset your RCA universal remote you can check out this easy guide on how to reset your RCA universal remote by following this guide you can easily reset your RCA universal remote in no time.

FAQ

How do I program an RCA Universal Remote to a DVD player without codes?

To program the RCA universal remote to a DVD player without using the codes you can follow the RCA universal remote code search method.

How to program RCA universal remote to TV

To program the RCA universal remote with TV either you can follow the direct code entry method or the RCA universal remote code search method listed in this article.

What is the TV button on the RCA remote?

The TV button on the RCA universal remote is used to program the remote with the TV. It signals the remote that we are going to program the remote with a TV.

How to program RCA universal remote code?

To program the RCA universal remote with code press and hold the device type button and enter the code for your device while holding the device key.

Wrap Up

That’s it for this article.

I hope with the help of these detailed RCA universal remote instructions you can easily program your RCA universal remote with and without using the codes.

If you are still facing any trouble in programming RCA universal remote please let me know in the comments. If you need the programming guide for any other remote please let us know.

Thank You