Are you looking for the latest RCA universal remote codes to program it with your Vizio TV? then you are in the right place.
In this article, I have shared the [2024] latest RCA universal remote codes for Vizio TV and the program instructions to easily setup the RCA universal remote with Vizio TV.
Without any delay let’s get started
Contents
RCA universal remote codes list for Vizio TV
RCA 4-digit universal remote codes for Vizio TV
- 1758, 0864, 2757, 2512, 0885, 3758, 2707, 1756, 1499, 3415, 1224, 1204, 1207
RCA 5-digit universal remote codes for Vizio TV
- 11758, 12512, 12757, 10864, 11756, 10885, 13758, 15111, 15144, 23155, 23161, 26455, 31544, 36333, 12707, 13415, 35011, 40412, 80016, 20111, 22111, 28911, 51914, 34112, 14905, 14723
This is the complete list of RCA universal remote control codes for Vizio TV.
How to program RCA Universal remote to Vizio TV with codes
- Turn on your Vizio TV.
- Press and hold the TV button on the remote.
- While holding the TV button enter the first code from the above list.
- If the entered code is compatible the power button of the remote should light up.
- If the power button blinks 4 times the code is not compatible.
- Enter the next codes until the power button lights up.
- Once you find the compatible code release the TV button.
Bingo your RCA universal remote is programmed with your Vizio TV. Now use can use your RCA universal remote to control your Vizio TV.
Remember to keep holding the TV button through the programming process until you find the right codes.
How to program RCA Universal remote to Vizio TV without codes
If you are unable to find the right codes fear not you can program the RCA universal remote with your Vizio TV without using the codes by following this RCA universal remote code search method.
- Turn on your Vizio TV.
- Point your remote toward the TV.
- Press and release the TV button on the remote.
- The red light on the remote will begin to flash.
- Now simultaneously hold the TV button and the Power button of the remote.
- The power button will blink and light up again.
- Release the power button and the TV button.
- After that press and release the Play button of the remote every 5 seconds.
- Do it until the TV turns off.
- Once the TV turns off press the Reverse button of the remote.
- Press and release it every 5 seconds until the TV turns on.
- After the TV turns on press the Stop button on the remote.
- The compatible code for your TV is saved in the remote memory.
That’s it your RCA universal remote is programmed with your Vizio TV without using the codes.
While programming with this method your remote can take some time to find the right and compatible codes. Follow all the instructions carefully and wait for your remote to respond properly.
RCA universal remote not working with Vizio TV
If your RCA universal remote is not working with your Vizio TV you can follow the steps mentioned below
- If your remote batteries are old replace them with a new pair.
- Make sure that you have followed all the instructions mentioned in this article carefully.
- Remove any obstruction between the remote and the device.
- You can also reset and re-program your RCA universal remote to Vizio TV.
Is there any other universal remote for Vizio TV
Yes, you can use the GE universal remote instead of the RCA universal remote to control your Vizio TV. The GE universal remote is much easier to pair with Vizio TV and with the wide availability of codes it becomes one of the best budges universal remote for Vizio TV.
FAQ
Does RCA make a universal remote?
Yes, RCA has a wide range of universal remotes to choose from you can choose the remote according to your convenience and use like for 2-device, 4-device, etc.
How do I connect my RCA antenna to my Vizio TV?
To connect your RCA antenna to the Vizio TV for this you can refer to the instruction manual that either comes with the Vizio TV or the RCA antenna.
Can a Vizio TV use a universal remote?
Yes, you can use a universal remote to control the Vizio TV.
Is my Vizio TV a smart TV?
To confirm whether your Vizio TV is a Smart TV or not you can refer to the instruction manual of the TV.
Wrap Up
That’s it for this article.
I hope with the help of Vizio TV codes for RCA universal remote mentioned in this article now you can easily program your RCA universal remote with Vizio TV.
If you are still struggling to setup the RCA universal remote to Vizio TV please let me know in the comments.
Thank You
“Hi, I’m Harsh, the driving force behind universalremoteexpert.com. I dive deep into tech, sharing hands-on insights through quick articles. Explore the latest trends and innovations with me as your guide in the world of universal remotes!”